HIKVISION DS-3E2300P-H Series, Быстрая настройка

Страница: 23 / 34

5
To connect the grounding cable:
1.
Remove the grounding screw from the rear panel of the switch
chassis.
2.
Attach the grounding screw to the ring terminal of the grounding
cable.
3.
Use a Phillips screwdriver to fasten the grounding screw into the
grounding screw hole.
4.
Use needle-nose pliers to make a loop at the other end of the cable.
5.
Attach the loop to the grounding strip through the grounding post,
and fasten the hex nut.
Figure 4 Connecting the grounding cable
Connecting the power cord
Connecting the AC power cord
Connect the power cord for the DS-3E2318P-H in the same way the
power cord for the DS-3E2326P-H is connected.
To connect the AC power cord:
1.
Wear an ESD wrist strap and make sure it makes good skin contact
and is reliably grounded.
2.
Connect one end of the AC power cord to the AC power receptacle
on the switch.
3.
Attach the bail latch to the switch.