HIKVISION DS-2XE Series, Быстрый старт, Страница: 7 / 30

4
3
Safety
UD12125B Version:1.0
Set up camera time manually for the first time access if the
local time is not synchronized with that of the network. Visit
the camera via Web browse/client software and go to time
settings interface.
Installation
Make sure the device is firmly secured to any wall or ceiling
mountings.
Be sure that there is enough space to install the camera
and accessories.
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that the wall is strong enough to withstand at
least 4 times the weight of the camera and the mount.
The standard power supply is 24 VDC, please make sure
your power supply matches with your camera.
Make sure that the power has been disconnected before
you wire, install, or disassemble the device.
Make sure that no reflective surface is too close to the
camera lens. The IR light from the camera may reflect back
into the lens causing reflection.
For device with this sticker, this device is intended for
installation in a restricted access location, access can only
be gained by service persons or by users who have been
instructed about the reasons for the restrictions applied to
the location and about any precautions that shall be taken.
Grounding
The both internal and external grounding shall be connected
reliably.
Ground wire cross-sectional area of not less than the phase
connector cross-sectional area level, at least 4 mm².