Thermal & Optical Bi-spectrum Network Camera User Manual
30
6.1.5 View Previous/Next Page
When the number of channels surpasses that of live view window division, this function can switch
live view among multiple channels.
Click
to switch live view among multiple channels.
6.1.6 Full Screen
This function is used to view the image in full screen mode.
Click
to start full screen mode and press ESC button to exit.
6.1.7 Light
Click
to turn on or turn off the illuminator.
6.1.8 Wiper
For the device that has a wiper, you can control the wiper via web browser.
Click
on live view page. The wiper wipes the window one time.
6.1.9 Quick Set Live View
It offers a quick setup of PTZ, display settings, OSD, video/audio and VCA resource settings on live
view page.
Steps
1. Click to show quick setup page.
2. Set PTZ, display settings, OSD, video/audio and VCA resource parameters.
–
For display settings, see Display Settings.
–
For OSD settings, see OSD.
–
For audio and video settings, see Video and Audio.
–
For VCA settings, Temperature Measurement, and Temperature Screening.
Note
The function is only supported by certain models.
6.2 Set Transmission Parameters
The live view image may be displayed abnormally according to the network conditions. In different