Thermal Bullet Camera·Quick Start Guide
9
Power Supply
●
Please purchase the charger by yourself. Input voltage should
meet the Limited Power Source (100-240 VAC) according to the
IEC62368 standard. Please refer to technical specifications for
detailed information.
●
Make sure the plug is properly connected to the power socket.
●
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
●
DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
●
DO NOT touch the bare metal contacts of the inlets after the
circuit breaker is turned off. Electricity still exists.
●
+ identifies the positive terminal(s) of equipment which is used
with, or generates direct current. - identifies the negative
terminal(s) of equipment which is used with, or generates direct
current.
●
The equipment must be connected to an earthed mains socket-
outlet.
●
A readily accessible disconnect device shall be incorporated
external to the equipment.
●
An all-pole mains switch shall be incorporated in the electrical
installation of the building.
●
Ensure correct wiring of the terminals for connection to an AC
mains supply.
●
The equipment has been designed, when required, modified for
connection to an IT power distribution system.