HIKVISION DS-2TD2137-7P Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 26

HIKVISION DS-2TD2137-7P Скачать руководство пользователя страница 10

DS-2TD2137-7P Thermal Network Bullet Camera Quick Start Guide

QSG DS-2TD2137-7P 041521NA

10

Cable Description

Name

Description

Power Interface

For 12 VDC or 24 VAC power supply, make sure that the positive/negative terminals

are connected correctly

Network Interface Connect to the LAN interface, PoE (802.3af) is supported

Alarm Interface

Two-way alarm input and alarm output are supported

Alarm In: IN1, G/IN2, and G

Alarm Out: 1A, 1B/2A, and 2B

Audio Interface

Audio In: Pickup

Audio Out: Loudspeaker

RS-485 Interface Control line

NOTE:

The cables may vary by model. Here we list all cable types for reference. See the

actual product for the correct cables.

Alarm cables can be classified as 2-ch alarm inputs and 2-ch alarm outputs.

ALARM-IN1 and ALARM-IN2 are alarm input interfaces, and G indicates grounding

interface. (1A, 1B) and (2A, 2B) indicate two alarm output interfaces.

To reset the camera to default parameters, hold the Reset button and power on

the camera. After powering on the camera, continue to hold the Reset button for

about 10 seconds.

1.5

Interfaces of Junction Box

For certain camera models, the power cable, alarm cable, network cable, and audio cable are connected

to the junction box interfaces. Refer to the figure below for connections.

NOTE:

Junction boxes differ by model.

Figure 8, Interface Description

«
...
8
9
10
11
12
...
»

Содержание DS-2TD2137-7P



























Отзывы:

Нет отзывов