HIKVISION DS-2DF8836IX-AEL, Руководство пользователя

Страница: 41 / 143

Network Speed Dome User Manual
40
4.5.6 Setting/Calling a Pattern
Purpose:
A pattern is a memorized series of pan, tilt, zoom, and preset functions. It can be
called on the pattern settings interface. There are up to 4 patterns for customizing.

Setting a Pattern:
Steps:
1. In the PTZ control panel, click to enter the pattern settings interface.
2. Select a pattern number from the list as shown in Figure 4-13.
Figure 4-13 Patterns Settings Interface
3. Click to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the
information of
Program Pattern Remaining Memory (%) is displayed on the
screen.

Pan the speed dome to the right or left.

Tilt the speed dome up or down.

Zoom in or out.

Refocus the lens.
5. Click to save all the pattern settings.

These 4 patterns can be operated separately and with no priority level.

When configuring and calling the pattern, proportional pan is valid; the limit
stops and auto flip will be invalid; and the 3D positioning operation is not
supported.