HIKVISION DS-2DF7284-AW Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 108

HIKVISION DS-2DF7284-AW Скачать руководство пользователя страница 84

User Manual of IR Network Speed Dome

© Hikvision Digital Technology Co., Ltd. All Rights Reserved.

83

Figure 7-5

Recording Schedule Interface

2.

Check the checkbox of

Enable Record Schedule

to enable scheduled recording.

3.

Set the record parameters of the speed dome.

Figure 7-6

Record Parameters



Pre-record:

The time you set to start recording before the scheduled time or

the event. For example, if an alarm triggers recording at 10:00, and the
pre-record time is set as 5 seconds, the speed dome starts to record at
9:59:55.
The Pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s,
25 s, 30 s or not limited.

Note:

The pre-record time changes according to the video bitrate.



Post-record:

The time you set to stop recording after the scheduled time or

the event. For example, if an alarm triggered recording ends at 11:00, and the
post-record time is set as 5 seconds, the speed dome records until 11:00:05.
The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min
or 10 min.



Overwrite

: If you enable his function and the HDD is full, the new record files

overwrite the oldest record files automatically.

Note:

The Pre-record and Post-record parameters vary depending on the speed

www.cctvireland.ie

«
...
82
83
84
85
86
...
»

Содержание DS-2DF7284-AW













































































































Отзывы:

Нет отзывов