Ex
Explosion-proof Dome
·
Quick Start Guide
3
2
Installation
2.1
Preparation
2.1.1
Basic Requirement
All the electronic operation should be in strictly compliance with the electrical
safety regulations, fire prevention regulations and other related regulations in
your local region.
Make sure the device in the package is in good condition and all the assembly
parts are included.
2.1.2
Checking Installing Environment
Make sure that there is enough space to install the device and accessories.
Make sure that the wall is strong enough to withstand at least eight times the
weight of the device and accessories.
2.1.3
Preparing Cables
You should prepare proper cables according to the actual network bandwidth,
transmission distance and installation environment:
Network Cable
Power Cord
2.1.4
Preparing Tools
Before installation, prepare the tools, such as the expansion screws, electric hammer,
electric drill, wrench, screwdriver, electroprobe, and network cable.
2.1.5
Original Packaging
When you unpack the device, keep the original package properly, in case of returning
or repairing the camera, you can pack the device with the package.
Note:
The user should be responsible for any damage caused due to transporting in
unoriginal package.
2.1.6
Run the Device in Safe Area
It is recommended to trial run the device in the safe area before installation.
Steps:
1.
Make sure the power cable and network cable are connected properly. Then power
on the device to trial run the device.