HIKVISION DS-2DF5284-A, Руководство пользователя, Страница: 27 / 44

User Manual of IR Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
26
Purpose:
You can define the speed of the dome movements.
(1)
DOME SPEED: The manual movement speed of the dome can be set from level 1 to 10.
(2) SCAN SPEED: The scan speed defines the scan degree per second of pan scan, tilt scan, frame
scan, random scan and panoramic scan. The scan speed is adjustable from level 1 to level 40 and
the higher the level is, the faster the scan speed is.
(3) PRESET SPEED: The speed of calling a preset can be set from level 1 to 8. The higher level
corresponds to the faster speed to call a preset.

Limit stops
Purpose:
The limit stops are user-configurable stops which limit the panning and tilting area of the speed
dome. There are left, right, up and down limit stops to define an area.
Steps:
1. Move the cursor to LIMIT STOPS and click FOCUS+ to set it ON to enable this feature. Click IRIS+
to confirm the new settings.
2. Move the cursor to SETTING LIMIT STOPS and click IRIS+ . You will see the message SET LEFT
LIMIT on the screen.
3. Click the direction buttons in the PTZ panel to configure the left limit stop. Click IRIS+ to confirm
the new settings.
4. Follow the prompts to configure the right, up and down limit stops on the menu.
Note: The new limit stops will overwrite the existed ones by default.
5. You can clear the defined limit stops. Click IRIS+ to enter CLEAR STOPS and click IRIS+ again to
clear the stops.

Elevation set
You can set ELEVATION SET as ON to increase the elevation angle range of the speed dome or set it
as OFF to disable the function.
Note: The range of the elevation angle is 0-90° by default and it changes to -2°-90° when the
ELEVATION SET is set as ON .
3.4.2 Configuring Presets
Purpose:
A preset is a user-defined monitoring position/point. You can simply call the preset number to
change the monitor scene to the defined position.
Steps:
1. Move the cursor to enter preset configuration submenu:
MAIN MENU > DOME SETTINGS > PRESETS
/R&DOO ZZZFFWYLUHODQGLH VKRS#FFWYLUHODQGLH