HIKVISION DS-2DE2A204IW-DE3(S6) Скачать руководство пользователя страница 26

Страница: 26 / 103

4. Click Add.

It is listed in Privacy Mask List.

5. Edit Name, Type, and Active Zoom Ratio on your demand.

Active Zoom Ratio

When the actual zoom ratio is less than the set active zoom ratio, the set area can not be

covered. When the actual zoom ratio is greater than the set active zoom ratio, the privacy

mask is valid. The maximum value of active zoom ratio depends on the camera module.

Note

Active zoom ratio is only supported for the PTZ channel.

6. Repeat the steps above to set other privacy masks.
7. Check Enable Privacy Masks.

3.10 Set Smart Tracking

The device detects and tracks moving targets in the scene and keeps the target in the center of the

live image with a predefined size during the tracking process.
Steps

Note

This function is only supported by certain device models.

1. Go to Configuration → PTZ → Smart Tracking .
2. Check Enable Smart Tracking.
3. Set the Duration. The device stops tracking when the duration time is up.
4. Set the zooming control and tracking parameters.

Zooming Control

Two modes are available. Controlled by target frame or by tilt angle of the device.
By Tilt Angle

The device calculates the tracking zoom ratio automatically according to the tilt angle of

the device.

Note

The attitude of the device affects the accuracy of this zooming control mode. For the

model with a built-in gyroscope, try to calibrate the attitude if some zooming problems

happen during tracking. See for instructions.

By Target Frame

The tracked target has a virtual frame around. The device calculates a suitable zoom ratio

according to the frame and the set Tracking Zoom Ratio. Larger value means bigger zoom

ratio.

Network Speed Dome User Manual

Содержание DS-2DE2A204IW-DE3(S6)








































































































Результаты поиска

Содержание DS-2DE2A204IW-DE3(S6)

Отзывы:

HIKVISION DS-2DE2A204IW-DE3(S6), Руководство пользователя, Страница: 26 / 103

Результаты поиска

Содержание DS-2DE2A204IW-DE3(S6)

Отзывы: