HIKVISION DS-2CS54C8T-PH Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 12

HIKVISION DS-2CS54C8T-PH Скачать руководство пользователя страница 12

Select a PRIVACY area. Set the DISPLAY status as ON.

Click up/down/left/down button to define the position
and size of the area.
MOTION

In the user-defined motion detection surveillance area,
the moving object can be detected and the alarm will
be triggered. Up to 4 motion detection areas can be
configured.

MOTION

MODE
AREA 0
AREA 1
AREA 2
AREA 3
SENSITIVITY
COLOR
TRANSPARENCY
RETURN

OFF






50

RED

OFF

Figure 3-8

MOTION

Select a MOTION area. Set the DISPLAY status as ON.

Click the up/down/left/right button to define the
position and size of the area. Set the SENSITIVITY from

0 to 100.
CAMERA ID
Edit the camera ID on this section.

CAM ID SETTING

MODE
CAM ID
X POSITION
Y POSITION
RETURN

ON



75

36
16

Figure 3-9

CAM ID SETTING

Set the MODE as ON. Click up/don left/right button to
choose the camera ID and the position.
DPC (Defective Pixel Correction)

Defective pixels are pixels in a CMOS image sensor fail
to sense light levels correctly. This series of camera
supports defective pixel correction.
Set the mode as ON to enable this function, and OFF to
disable the function.

3.3.6

RESET

Reset all the settings to the default.

3.3.7

SAVE & EXIT

Move the cursor to SAVE & EXIT and click Iris+ to save
the setting and exit the menu.

UD06680B

«
...
10
11
12

Содержание DS-2CS54C8T-PH













Отзывы:

Нет отзывов