5.
Secure the junction box’s body on the ceiling/wall
with supplied screws.
Junction Box
Body
Figure 2-6
Secure the Junction Box on the Wall/Ceiling
6.
Route the cables through the bottom cable hole or
the side cable hole of the junction box.
7.
Combine the junction box cover with its body.
Figure 2-7
Combine the Junction Box Cover with
Body
8.
Repeat the step 5 to 6 of 2.1.1 Ceiling/Wall
Mounting without Junction Box to finish the
installation.
2.2
Installation of Type II Camera
2.2.1
Ceiling/Wall Mounting without Junction Box
Before you start:
The installation of ceiling mounting and wall mounting
are similar. Following takes ceiling mounting as an
example.
Steps:
1.
Disassemble the camera by rotating the camera to
align the notch to one of the line, as shown in the
figure below.
Notch
Figure 2-8
Dissemble the Camera
2.
Pry the mounting base by using a flat object, for
example, a coin.
