Figure 2-14
Fix the Wall Mount
3.
Loosen the set screw.
4.
Rotate the camera to align the triangle mark with
the screw hole, and disassemble the camera.
Triangle
Mark
Figure 2-15
Dissemble the Camera
5.
Use M4 × 10 screws to fix the base onto the wall
mount.
Figure 2-16
Fix the Base onto the Wall Mount
6.
Repeat steps 6 to 9 of 2.2.1 Ceiling Mounting
Without Junction Box to finish the installation.
Figure 2-17
Finish the Installation
2.3
Installation of Type IV & V Camera
2.3.1
Ceiling Mounting without Junction Box
Steps:
1.
Paste the drill template (supplied) to the installation
location.
2.
(Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3.
Install the camera to ceiling.
i.
Secure the installation plate to the ceiling with
three PA4 × 25 screws (supplied).
ii.
Fit the camera onto the installation plate.
iii.
Turn the camera as the figure below until it snaps
into the installation plate.
