Triangle
Mark
Set Screw
Figure 2-7
Dissemble the Camera
iii.
Secure the base to the ceiling with three PA4 ×
25 screws (supplied).
iv.
Align the screw hole with the triangle mark to
install the camera back to the base and secure it.
Triangle
Mark
Figure 2-8
Install the Camera to Ceiling
4.
Connect the power cord and video cable.
5.
Power on the camera to adjust the view angle
according to the figure below.
Rotation Postion
[0° to 360°]
Figure 2-9
3-Axis Adjustment
1).
Rotate the enclosure to adjust the pan position
[0° to 360°].
2).
Move the main body up and down to adjust the
tilt position [0° to 75°].
3).
Rotate the main body to adjust the rotation
position [0° to 360°].
2.2.2
Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Ceiling mounting with junction box and inclined
ceiling mount are similar. Following steps take
junction box as an example.
Steps:
1.
Loosen screws to take apart the junction box.
2.
Paste the drill template for junction box to the
installation location.
3.
(Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
4.
(Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5.
Secure the junction box body on the ceiling with
three or four PA4 × 25 screws according to the
actual object.
6.
Fix the camera to the junction box.
For Type III camera:
