HIKVISION DS-2CD6825G0/C-I(V)(S), Руководство пользователя

Страница: 15 / 141

Network Camera User Manual
14
failed, please make sure that the password meets the requirement and try again.
5.
Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
Figure 2-5
Modify the IP Address
6.
Input the admin password and click Modify to activate your IP address
modification.
The batch IP address modification is supported by the SADP. Refer to the user manual
of SADP for details.

Activation via Client Software
The client software is versatile video management software for multiple kinds of
devices.
Get the client software from the supplied disk or the official website, and install the
software according to the prompts. Follow the steps to activate the camera .
Steps:
1.
Run the client software and the control panel of the software pops up, as shown in