High-definition Vandal-proof Dome Camera
·
User Manual
34
34
7.
Return to the
MAIN MENU
and click
SAVE ALL
.
8.
You can find the
BLOCK DISP
take effect after you exit the
main menu.
MONITOR AREA
Steps:
1.
Move the cursor to
MOTION DET
, select
ON
and press the
menu button to enter the submenu.
2.
Position the cursor on
DETECT SENSE,
and set the menu
button left/right to adjust the sensitivity level.
3.
Position the cursor on
MONITOR AREA
. Select
OFF
to disable
area motion detection. Select
ON
to enable area motion
detection.
4.
Position the cursor on
AREA SEL
to select one area. There are
four areas available.
5.
Set the values of
TOP
,
BOTTOM
,
LEFT
and
RIGHT
. The size
and position of the area is defined by these values. And after
you set all this value, you can see a frame on the image.
6.
Return to the
MAIN MENU
and click
SAVE ALL
.
7.
You can find the
MONITOR AREA
frame take effect after you
exit the main menu.
Note:
The
MONITOR AREA
frame takes effect only when the
BLOCK
DISP
panes are included in the
MONITOR AREA
frame.