IR Bullet Camera
·
User Manual
23
23
If you want to route the cables inside the ceiling, drill a ho le in
the ceiling for wiring and pull all the cables through the ho le
and terminate all wires.
4.
Connect the cables to the corresponding connectors on the
camera.
Figure 2-8
Secure the Camera
5.
Apply the power to the camera.
6.
Position the camera.
1).
View the camera image using the service interface.
2).
Loosen the panning table as shown in Figure 2-9.
3).
Rotate the panning table to adjust the panning position of
the camera. The adjusting range is from 0 degree to 360
degrees.
Wall
