HIKVISION DS-2AE7230TI-A, Руководство пользователя, Страница: 18 / 47

User Manual of HD-TVI Speed Dome
© Hikvision
17
DISPLAY SETTINGS
ZOOM RATIO ON
P/T ANGLE ON
ALARM OFF
TIME ON
PRESET LABEL ON
ZONE OFF
BACK EXIT
DISPLAY SETTINGS
ADDRESS OFF
ERROR RATE OFF
FAN/HEAT OFF
BACK EXIT
Figure 3-6 Display Settings
The speed dome shows the viewing direction when you manually control it to rotate.
Table 1-1 Viewing Direction Display
Display N NE E SE S SW W NW
Indication North Northeast East Southeast South Southwest West Northwest
The north direction refers to the angle zero.

Heat Parameter Configuration
You can set the HEAT CONTROL as TEMP (controlled by the temperature), ON or OFF .

Fan Parameter Configuration
You can set the FAN CONTROL as TEMP (controlled by the temperature), ON or OFF .

EIS (Electronic Image Stabilization) Configuration
You can set the EIS FUNCTION as ON or OFF ; and set the EIS LEVEL as 0-3.
The selectable EIS level varies according to the different camera models.

Preset Direct Focus
You can set the preset direct focus function ON/OF on PRESET DFOCUS submenu.

Protocol and RS-485 settings

Select the protocol.
Choose the protocol on PROTOCAL submenu. You can configure it as AUTO MATCH, PELCO-P,
PELCO-D, or HIKVISION . When you choose AUTO MATCH , it is protocol self-adaptive.

Set the protocol status.
Set the PROTOCOL STATUS as ON to enable the user-defined protocol.

Enable the RS-485 configuration diagnosis.