HIKVISION DS-2AE4223TI-A Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 46

HIKVISION DS-2AE4223TI-A Скачать руководство пользователя страница 30

User Manual of HD-TVI Speed Dome

© Hikvision

24

Move the cursor to

PRESET PTZ

and click

IRIS+

to edit the preset position. Use the direction

buttons to move the speed dome to find the desired scene/position, and then press

IRIS+

to

confirm the settings and return to the previous menu, or press

IRIS-

to cancel.

The preset position settings will be restricted by the limits if they are defined.

4.

Call the presets.
You can select the preset number from the drop-down preset list in the control panel of the
encoder through a web browser, and click the arrow to call a user-defined or system-defined
preset.

5.

Clear the preset settings.
Move the cursor to

CLEAR

and click

IRIS+

to clear the settings of the current preset.

3.4.3

Configuring Patrols

Purpose:

A patrol is a scanning track specified by a group of user-defined presets. You can call a patrol to scan
the scenes automatically among the user-defined presets in sequence.

Steps:

1.

Move the cursor to enter patrol configuration submenu:

MAIN MENU > DOME SETTINGS > PATROLS

PATROLS

PATROL NO.            1
EDIT PATROL
PREVIEW
CLEAR PATROL
PATROL_D           30S

BACK EXIT

Figure 3-13

Patrol Configuration Menu

2.

Choose the patrol number.

Steps:

(1)

Move the cursor to

PATROL NO.

and click

IRIS+

to enter edit mode.

(2)

Click the up and down direction buttons to select the number of the patrol which is to be
configured.

(3)

Click

IRIS+

again to confirm the settings and exit edit mode of this column.

Up to 10 patrols can be configured.

3.

Edit the patrol.

www.cctvireland.ie

[email protected]

«
...
28
29
30
31
32
...
»

Содержание DS-2AE4223TI-A















































Отзывы:

Нет отзывов