User Manual of Ethernet-over-Coax Extender
9
2.2 Panel of the Receiver
Front Panel:
Description of Front Panel:
Serial No.
LED Indicator
Description
Video Out
Send the CVBS video signal to the terminal device.
DIP Switch
Set the Ethernet-over-Coax bandwidth.
LAN
Send the network signal to the terminal device.
Rear Panel:
Description of Rear Panel:
Serial No.
LED
Indicator
Description
Power
Connect to 12 VDC power supply.
Power LED
Indicate red when the device is powered on.
Coax
Connect to the Transmitter and receive the modulated
network video signal and CVBS analog video signal.
2.3 Configuring Coax Transmission Bandwidth
You can use the DIP switch settings to configure the downstream bandwidth of the DS-1H05-T or
DS-1H05-T/E module and the upstream bandwidth of the DS-1H05-R. Refer to the following table:
