User Manual of Ethernet-over-Coax Extender
Preventive and Cautionary Tips
•
In the use of the product, you must be strict compliance with the electrical
safety regulations of the nation and region.
•
Please use the power adapter, which is provided by normal company. The
standard of the power adapter is 12VDC /1A for DS-1H05-T and DS-1H05-R,
12VDC/2A for DS-1H05-4R, DS-1H05-8R and DS-1H05-T/E, and 12VDC/4A
for DS-1H05-16R.
•
Please disconnect the power supply before installation or operation.
•
If the product does not work properly, please contact your dealer or the
nearest service center. Never attempt to disassemble the camera yourself.
(We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.)
•
If smoke, odors or noise rise from the device, turn off the power at once
and unplug the power cable, and then please contact the service center.
•
Do not drop the equipment or subject it to physical shock, and do not
expose it to high electromagnetism radiation. Avoid the equipment
installation on vibrations surface or places subject to shock (ignorance can
cause equipment damage).
•
Do not place the equipment in extremely hot, cold (the operating
temperature shall be -10°C ~ +55°C), dusty or damp locations, or fire or
electrical shock will occur otherwise.
3
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]