HIKVISION Color Zoom Camera, Руководство пользователя

Страница: 20 / 39

14
(b). If the exposure mode is manual or AE, the AGC should be set as High.
3.2.7 Motion Detection
In Motion Detection, the Motion D functions, sensitivity and motion areas can be set by manual. After the setup,
user can detect the motion situation of the intruder.
The motion D has two work modes: When Motion D is Close, if alarm input occurs, the alarm output will directly
respond. When Motion D is Open, the camera will auto detect monitoring area, and output alarm signal.
3.2.8 Special Functions
User can set the CN/EN language, RS-485, BLC, Zoom Speed, Definition, POS/NEG and Line control.
Fig 3.11 Special Function sets
CN/EN Setup:
Move cursor to “CN / EN” through up / down, and press left / right to select CN or EN.
BLC Setup:
The options have User…/Close/Default…
Note: This function is only available when “Auto” selected in Exposure. The setup will retain when other options
selected in Exposure.
When “Default” is selected, the camera will adjust according to the default region. Press “MENU” to see the
default back light area, and press “MENU” again to exit.
When select “USER”, user can customize the back light area.
When entering adjust status, use up/down/left/right to adjust the back light area position. Press “MENU” once to
release, use up/down/left/right to change to area adjustment status, press “MENU” for 2 min to exit.
Special Function
CN/EN EN
BLC User…/Close/Default…
RS-485 …
POS/NEG +/
-
ZSpeed 1/ 2/ 3/ 4
Define 1/ 2/ 3/ 4/ 5
Line Mode1/Mode2
Back