Figure 2-4 Universal Adjustment
6.Adjust the camera according to the figure below
to get an optimum angle.
Figure 2-3 Secure the Camera
7.Use the screwdriver to adjust the ZOOM screw
and the FOCUS screw until you get the optimum
image.
Figure 2-5 Zoom and Focus Adjustment
2.2 Installation of Type II Camera
Both wall mounting and ceiling mounting are
suitable for type
bullet camera. Ceiling mounting
II
will be taken as an example in the section. And you
can take steps of ceiling mounting as a reference
if wall mounting is adopted.
Steps:
1.Drill the screw holes and the cable hole in the
ceiling according to the supplied drill template.
2.Hammer the supplied plastic expansion bolt into
the screw holes.
Figure 2-6 Drill Template
3.Route the cables to the cable hole and connect
the corresponding cables.
4.Fix the camera to the ceiling with the supplied
screws.
Figure 2-7 Fix the Camera to the Ceiling
Figure 2-8 3-axis Adjustment
5. Adjust the surveillance angle.
1). Loosen No.1 adjusting screw to adjust the pan
position (0 ~ 360 ).
°
°
2).Tighten No.1 adjusting screw
.
3). Loosen No.2 adjusting screw to adjust the
tilting position(0 ~ 90 ).
°
°
4).Tighten No.2 adjusting screw.
5). Loosen No.3 adjusting screw to adjust the
rotation position 0 ~ 360 .
( °
°)
6).Tighten No.3 adjusting screw
.
0~360
0~360
1
2
3
0~90
3.2 DAY/NIGHT
Color, B/W, AUTO and EXT are selectable for DAY/
NIGHT switches. Under the mode of the AUTO and
EXT, you can set the IR LED as Smart and CDS. If the
IR LED is selected as Smart, you can set the bright-
ness of the IR LED.
3.3.3 AWB
Figure 3-2 DAY/NIGHT
Figure 3-3 AWB
SPECIAL
1. PRIVACY
ZONE
2. MOTION
3. HLC
4. RETURN
RET
Figure 3-4 SPECIAL
Motion
: Set the Motion status as ON or OFF. Set
the SENSITIVITY from 0 to 255. Set the alarm status
as ICON/TRANCE/OFF. Set the hold time from
0 second to 255 seconds.
HLC
: HLC supplements the brightness of the
peripheral area of the image. You can set the mask
value and threshold from 0 to 255.
Privacy zone
: Select a PRIVACY area. Set the
MASK PAT as OFF, GRAY, WHITE or BLACK. Set the
SX/EX/SY/EY value to define the position and size
of the area.
DAY/NIGHT
1. MODE
AUTO
2. D TO N
63
3. N TO D
63
4. DELAY TIME
20
5. RETURN
RET
AWB
1. MODE
AUTO
2. R-G GAIN
255
3. B-G GAIN
151
4. RETURN
RET
Auto, User, Push, 8000k, 6000k, 4200k and 3000k
are selectable for AWB. Under the mode of AUTO,
you need to set the R-G/B-G Gain and to select an
indoor/outdoor mode. If the AWB mode is select
as User, You need to set the R/G/B Gain manually.
3.3.4 AE
You can set the AE mode as HOLD, DC and ESC.
: Brightness refers to the brightness
Brightness
of the image.
: Shutter denotes the speed of the shutter.
Shutter
You can set the shutter as AUTO, 1/25, 1/30, 1/50,
1/60, 1/100, 1/120, 1/250, 1/500, 1/1k, 1/3k and
1/10k.
: You can set the flicker status as 50HZ/60HZ
Flicker
to prevent image flicking.
: BLC bases on the back area to enhance the
BLC
brightness of the whole image. You can set the
BLC gain from 0 to 16.
: AGC optimizes the clarity of image in poor
AGC
light scene. The value of AGC can be set from 1-5.
: LSC corrects the phenomenon where the
LSC
image gets darkened or blurred on the periphery.
3.3.5 SPECIAL
SYSTEM
1. CAMERA ID
255
2. ID DISP.
ON
3. NAME DISP.
ON
4. LANGUAGE
ENG
5. FACTORY INIT
OFF
6. RETURN
RET
3.3.7 SYSTEM
You can set the camera ID from 0 to 255.
Select the ID display and name display status as
ON/OFF.
Chinese and English are selectable for the language
of the menu.
You can restore the camera to the default by
setting the factory initialization status as ON.
3.3.8 EXIT
Exit and Save & exit are selectable.
EFFECT
1. COLOR GAIN
200
2. COLOR HUE
200
3. SHARPNESS
25
4. CONTRAST
150
5. BRIGHT OFF.
1
6. MIRROR
ON
7. FLIP
ON
8. RETURN
RET
Color Gain
: Color gain adjust this feature to change
the saturation of the color. You can set the value
from 0 to 255.
: You can adjust the image HUE from
Color Hue
0 to 71.
: Sharpness determines the amount of
Sharpness
detail that an imaging system can reproduce.
You can set the value from 0 to 255.
: Contrast enhances the difference in
Contrast
color and light between parts of an image.
You can set the value from 0 to 255.
: Bright Off. refers to the brightness
Bright Off.
compensation of the image. You can set the bright
compensation value as 0 or 1.
: You can set the Mirror status as ON/OFF.
Mirror
: You can set the FLIP status as ON/OFF.
Flip
3.3.6 EFFEC T
Figure 3-5 EFFEC T
Figure 3-6 SYSTEM
3 Menu Operation
Figure 3-1 Main Menu
Menu
AE
AWB
DAY&NIGHT
SYSTEM
SPECIAL
EFFECT
DC
ESC
HOLD
FRAME
RATE
AUTO
USER
HOLD
8000K
6000K
COLOR
B/W
AUTO
CAMERA
ID
ID DISP
PRIVACY
ZONE
MOTION
HLC
LANGUAGE
COLOR
GAIN
COLOR
HUE
SHARPNESS
EXIT
VIDEO. OUT
4200K
3200K
CONTRAST
BRIGHT
MIRROR
FLIP
NAME
DISP
FACTORY
INIT
EXT
PUSH
A coaxial camera controller (purchase separately)
is required to select the menu and adjust the
camera parameters.
3.1 VIDEO.OUT
You can set the frame rate as 25 fps/30fps.
6.Push the focus &zoom adjustment cover upward
to move it aside.
7.Use the cover as a screwdriver to adjust the ZOOM
screw and the FOCUS screw until you get the
optimum image.
Cover
Focus
Zoom
0~360
Cover
Figure 2-9 Zoom and Focus Adjustment