Schedule and Timer Settings
You can set the Entry Delay 1 & Entry Delay 2 time duration for
the delayed zone type and the Exit Delay delayed time to exit the
zone. You can also set the alarm schedule. The zone will be
armed/disarmed according to the configured time schedule.
Steps
1. Click Partition Management → Schedule & Timer to enter the
Schedule & Timer page.
Figure 4-20 Schedule & Timer Settings
2. Select a partition.
3. Set time duration of Delay 1, Delay 2, or Exit Delay
respectively.
Delay 1/Delay 2
If you have set the delayed zone, you can set the delayed
time duration here.
Note
The available time duration range is from 5s to 600s.
Exit Delay
If you want to exit the zone without triggering the alarm,
you can set the exit delay duration.
Note
The available time duration range is from 5 s to 600 s.
4. Optional: Set the following parameters according to actual
needs.
Enable Auto Arming
Enable the function and set the arming start time. The zone
will be armed according to the configured time.
Note
The auto arming time and the auto disarming time cannot
be the same.
30
