5
2 Installa�on
Before youstart:
Please make sure that the device in the package is in
good condi�on and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installa�on.
Check the specifica�on of the products for the
installa�on environment.
Check whether the power supply is matched with your
power output to avoid damage.
Please make sure the wall is strong enough to
withstand four �mes the weight of the camera and the
moun�ng.
If the wall is the cement wall, you need to insert
expansion screws before you install the camera. If the
wall is the wooden wall, you can use self-tapping screw
to secure the camera.
If the product does not func�on properly, please
contact your dealer or the nearest service center. Do
not disassemble the camera for repair or maintenance
by yourself.
2.1 Ceiling Moun�ng
The installa�on steps of ceiling moun�ng are shown as
follows.
Step 1 Drill the screw holes according to the drill
template with Φ5.5mm electric drill.
Screw hole
Figure 2-1 The Drill Template
Step 2 Loosen the adjus�ng screw of the main body
with the allen wrench.
Adjus�ng Screw
Figure 2-2 Loosen the Adjus�ng Screw
Open the enclosure to take out the camera.
Step 3
