User Manual of DS-6100-ATA Digital Video Server
- 6 -
Chapter 2 Installation
2.1 Hardware installation
2.1.1 Installation steps
1.
Open packing case, and check the integrity;
2.
Take out things needed in installation;
3.
Connect cables needed (video signal input cable, audio signal input cable, RS485 cable
and cable for LAN);
4.
Take out stabilizer power supply and power on.
2.1.2 Installation notice
Please read the following notice carefully. If you have any question, please contact us.
Notice:
1.
After Opening the packing box, please check carefully to confirm that the goods in it are
consistent with list;
2.
Please read user's manual carefully before installation;
3.
Please power-off all related equipments before installation;
4.
Please check the voltage of power supply to avoid voltage mismatch;
5.
Installation environmental: Do not use it under humidity and high temperature; to keep
ventilation to vent freely, avoid to be walled up; to keep them horizontally, avoid to set
up in the vibration surroundings.
2.2 HDD Installation
Installation notice
The DS-6100HCI-ATA has no HDD when leaving factory. Based on the record schedule, you
can calculate the total capacity you need (refer to Appendix A). Please ask the specialist to
disassembly the video server and install HDD.
Installation instrument
One cross screw driver
HDD installation
1.
Open the video box.
2.
Place the HDD in the proper space and fix it with screw.
