HIKVISION 2T series, Быстрый старт, Страница: 18 / 37

Network Bullet Camera
·
Quick Start Guide
17
17
Figure 2-7 Dimension of Junction Box
Steps:
1. Paste the drill template to desired mounting place. Drill the screw
hole and cable hole according to the supplied drill template
(shown as Figure 2-3).
2. Align the screw holes of the junction box to the drill template, and
fix the junction box to the wall with screws.
3. Hang the camera with the safety rope of junction box.
4. Route the cables.
5. Fix the camera to the junction box with screws.
6. Adjust the surveillance angle according to step 3 in Section 2.2.
7. Install the water-proof jacket according to Section 2.5.