5
USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○
Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
○
When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○
There may be an occasional pause during USB
recharging.
○
When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
○
It may not be possible to charge some USB devices,
depending on the type of device.
NAMES OF PARTS (Fig. 1 – Fig. 17)
1
Handle
2
Trigger switch
3
Lock-o
ff
button
4
Housing
5
Front cover
6
Lever
7
Blade
8
Base
9
LED light
0
Base lever
!
Battery
@
Blade hole
#
Slit of plunger
$
Another blade
%
Stroke
^
Hook
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CR18DBL: Cordless Reciprocating Saw
To reduce the risk of injury, user must read
instruction manual.
Direct current
kg
Weight
Switching ON
Switching OFF
Disconnect the battery
Lock
Unlock
Remaining battery indicator switch
The battery remaining power is nearly empty.
Recharge the battery soonest possible
The battery remaining power is a half.
The battery remaining power is enough.
Mode selector switch
Mode indicator lamp
Low mode
Medium mode
High mode
Auto mode
Warning
Prohibited action
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 13.
Standard accessories are subject to change without notice.
0000Book̲CR18DBL.indb 5
0000Book̲CR18DBL.indb 5
2017/12/05 10:33:50
2017/12/05 10:33:50
