English
23
APPLICATIONS
Cutting various types of wood.
PRIOR TO OPERATION
1. Power
source
Ensure that the power source to be utilized conforms to the power requirements speci
fi
ed
on the product nameplate.
2. Power
switch
Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle
while the power switch is in the ON position, the power tool will start operating immediately,
which could cause a serious accident.
3. Extension
cord
When the work area is removed from the power source, use an extension cord of su
ffi
cient
thickness and rated capacity. The extension cord should be kept as short as practicable.
4. Prepare a wooden workbench (
Fig. 2
)
Since the saw blade will extend beyond the lower
surface of the lumber, place the lumber on a
workbench when cutting. If a square block is utilized
as a workbench, select level ground to ensure it
is properly stabilized. An unstable workbench will
result in hazardous operation.
5. When using the side handle (
Fig. 3
)
Securely attach the side handle to the base with the
two screws (M6 × 20) when using the side handle.
CAUTION
To avoid possible accident, always ensure that the
portion of lumber remaining after cutting is securely
anchored or held in position.
Lumber
Base
Saw blade
Workbench
Fig. 2
Screw M6 × 20
Base
Side handle
Fig. 3
000Book̲C9U3̲ChS.indb 23
000Book̲C9U3̲ChS.indb 23
2018/03/27 14:40:33
2018/03/27 14:40:33
