English
20
OPTIONAL ACCESSORIES (sold separately)
(1) Dust Collector Set (D)
Connect the suction hose to collect saw dust with the
vacuum cleaner (see
Fig. 1
).
Dust collector
Fig. 1
(2) Washer (A) .......for 20 mm (Inner dia. of saw blade)
.......for 30 mm (Inner dia. of saw blade)
(3) Guide (with wing-bolt)
APPLICATION
Cutting various types of wood.
PRIOR TO OPERATION
1. Power
source
Ensure that the power source to be utilized conforms to the power requirements speci
fi
ed
on the product nameplate.
2. Power
switch
Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle
while the power switch is in the ON position, the power tool will start operating immediately,
inviting serious accident.
3. Extension
cord
When the work area is removed from the power source,
use an extension cord of su
ffi
cient thickness and rated
capacity. The extension cord should be kept as short as
practicable.
4. Prepare a wooden workbench. (
Fig. 2
)
Since the saw blade will extend beyond the lower
surface of the lumber, place the lumber on a workbench
when cutting. If a square block is utilized as a
workbench, select level ground to ensure it is properly stabilized. An unstable workbench
will result in hazardous operation.
CAUTION
To avoid possible accident, always ensure that the portion of lumber remaining
after cutting is securely anchored or held in position.
Lumber
Base
Work bench
Saw blade
Fig. 2
000Book̲C7SS̲ChS.indb 20
000Book̲C7SS̲ChS.indb 20
2018/03/27 16:56:59
2018/03/27 16:56:59
