5
C6MEY: Circular Saw
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
V
Rated voltage
n
0
No
-
load speed
Switching ON
Switching OFF
Disconnect mains plug from electrical outlet
Mode selector switch
Lighting switch
Prohibited action
Class
II
tool
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 7.
Standard accessories are subject to change without notice.
APPLICATIONS
Cutting various types of wood.
SPECIFICATIONS
Model
C6MEY
Voltage (by areas)*
(230 V, 240 V)
Power Input
1050 W
No
-
Load Speed
4100 /min
(Power mode)
2500 /min
(Silent mode)
Capacity
Cutting
depth
90°
66 mm
45°
45 mm
Weight
2.8 kg
* Be sure to check the nameplate on product as it is
subject to change by areas.
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci
fi
cations herein are subject to
change without prior notice.
Electronic control
○
Soft
-
start
○
Overload protection
This protection feature cuts o
ff
the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate causes
of overloading.
After that you can use it again.
○
Overheat protection
This protection feature cuts o
ff
the power to the motor
and stops the power tool in the event of overheating of
motor during operation.
When the overheat protection feature has been
activated, the motor may stop.
In this case, release the tool switch and cool it down in a
few minutes.
After that you can use it again.
○
Rotation speed changeover function (Power mode /
Silent mode)
(Power mode / Silent mode switch function)
Each press of the Mode Selector Switch changes the
operating mode. (
Fig. 15
)
Silent mode reduces maximum motor RPM enabling
e
ffi
cient work with less noise.
The Silent Mode Indicator Lamp lights in Silent mode.
When the load increases during Silent mode, the tool will
automatically switch to Power mode and revert back to
Silent mode when the load decreases.
In Power mode, no change is made to Silent mode even
when the load decreases.
NOTE
○
To enable mode changes, pull the switch once after
connecting the main plug.
○
Do not give a strong shock to the switch panel or break it.
It may lead to a trouble.
MOUNTING AND OPERATION
Action
Figure
Page
Fine tuning of parallelism
9
9
Fine tuning of perpendicularity
10
9
Fine tuning of guide piece position
11
9
Adjusting the cutting depth
12
10
Cutting line
13
10
Switch operation
14
10
About the mode select function (*1)
15
10
Using the LED light
16
10
Using the cord holder
17
10
Attaching the long guide (sold separately)
18
11
Attaching the guide (sold separately)
19
11
Attaching the
fl
uorine plate
(sold separately)
20
11
Attaching the dust collection adapter
(sold separately)
21
11
Cutting at right angles
22
11
Inclined cutting (+45° direction)
23
12
Inclined cutting (–5° direction)
24
12
Dismounting the saw blade
25
13
Mounting the saw blade
26
13
Selecting accessories
―
15
0000Book̲C6MEY.indb 5
0000Book̲C6MEY.indb 5
2018/04/03 15:29:24
2018/04/03 15:29:24
