HIKOKI C 3605DYA, Инструкция по эксплуатации

Страница: 19 / 324

19
English
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 316.
Standard accessories are subject to change without notice.
APPLICATIONS
Cutting various types of wood, or gypsum board, ceramic
siding board.
SPECIFICATIONS
1. Power tool
Model C3605DYA
Voltage 36 V
No - Load Speed
5000 min
–1
(Power mode)
2600 min
–1
(Silent mode)
Capacity Cutting
depth
90° 47 mm
45° 30 mm
Battery available for this tool* Multi volt battery
Weight**
2.8 kg (BSL36A18)
3.1 kg (BSL36B18)
* Existing batteries (BSL3660/3620/3626, BSL18xx
series, etc.) cannot be used with this tool.
** According to EPTA - Procedure 01/2014
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci fi cations herein are subject to
change without prior notice.
Electronic control
○ Soft - start
○ Overload protection
This protection feature cuts o ff the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate causes
of overloading.
After that you can use it again.
○ Overheat protection
This protection feature cuts o ff the power to the motor
and stops the power tool in the event of overheating of
motor during operation.
When the overheat protection feature has been
activated, the motor may stop.
In this case, release the tool switch and cool it down in a
few minutes.
After that you can use it again.
○ Rotation speed changeover function (Power mode /
Silent mode)
(Power mode / Silent mode switch function)
Each press of the Mode Selector Switch changes the
operating mode. ( Fig. 16 )
Silent mode reduces maximum motor RPM enabling
e ffi cient work with less noise.
The Silent Mode Indicator Lamp lights in Silent mode.
When the load increases during Silent mode, the tool will
automatically switch to Power mode and revert back to
Silent mode when the load decreases.
In Power mode, no change is made to Silent mode even
when the load decreases.
NOTE
○ To enable mode changes, pull the switch once after
installing the battery.
○ Do not give a strong shock to the switch panel or break it.
It may lead to a trouble.
2. Battery
Model BSL36A18
Voltage 36 V / 18 V (Automatic Switching*)
Battery capacity
2.5 Ah / 5.0 Ah
(Automatic Switching*)
Available cordless
products**
Multi volt series, 18 V product
Available charger
Sliding charger for lithium ion
batteries
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger ’ s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1 - second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 23 (on page 6).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1 )
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 1 , according to the condition of the
charger or the rechargeable battery.
0000Book̲C3605DYA̲EU.indb 19 0000Book̲C3605DYA̲EU.indb 19 2019/01/23 11:11:38 2019/01/23 11:11:38