English
40
Water is not being
discharged.
The trigger stopper is locked.
Remedy the problem in accordance
with the details listed in “Trigger
Stopper” on page 36.
The faucet it turned o
ff
.
Open the faucet fully.
The nozzle is blocked.
Clean the end of the nozzle with the
nozzle cleaner pin supplied.
The strainer is blocked.
Wash the strainer, which is
incorporated into the water feed inlet,
in accordance with the details listed in
“Inspecting the Strainer” on page 38.
The water pressure
won’t rise.
The power plug is not plugged
into the power socket.
Plug the power cord into the power
socket.
The switch is set at “OFF”.
Switch the washer on.
The water volume or pressure
from the faucet is too low.
○
Open the faucet fully.
○
Unravel any twists in the water
hose and high-pressure hose.
○
Check to make sure that the inner
diameter of the water hose is
correct.
○
Check to make sure that the water
hose is not wound onto the reel.
The nozzle is blocked.
Clean the end of the nozzle with the
nozzle cleaner pin supplied.
The electrical voltage is too low. Check to make sure that the thickness
and length of the extension cord is
appropriate.
Water is leaking.
Check the hose connections.
000Book̲AW130̲ChS-GB.indb 40
000Book̲AW130̲ChS-GB.indb 40
2018/03/27 18:35:57
2018/03/27 18:35:57
