Hikari H9199, Инструкция по эксплуатации и каталог запасных частей

Страница: 54 / 99

INSTRUCTION MANUAL
- 42 -
4-5 Threading the upper thread
CAUTION
Turn off the power switch before threading the upper thread.
The machine may operate if the treadle is depressed by mistake, which could result in injury.
Turn the machine pulley and raise the thread take-up(1) before
threading the upper thread.
This will make threading easier and will prevent the thread from
Coming out at the sewing start.
4-6 Adjusting the stitch length
Turn the stitch length dial(1) clockwise or counter-clockwise so that
the desired stitch length is at the upper-most position on the dial.
*The larger the number, the longer the stitch length will be.(The
numbers on the dial are for use as a guide. The length of the finished
stitches may vary depending on the type and thickness of material
being sewn. Adjust while looking at the finished stitches.)
* When turning the stitch length dial(1) from a larger setting to a
smaller setting, it will be easier to turn the dial if the reverse lever(2)
is pushed to the halfway-down position.
4-7 Using the knee lifter
The presser foot(2) can be raised by pressing the knee lifter
plate(1).