Title:
DS-K4H250/450/258 series magnetic lock
connect to DS-K2600 series Access Controller
Version:
v1.0
Date:
01/11/2018
Product:
Access Control Device
Page:
1 of 9
DS-K
4H250/450/258 series magnetic lock connect to DS-
K2600 series Access Controller
Preparation
Connecting magnetic lock to access controller is mainly applied to swiping card to open the door for
exiting. For magnetic lock and access controller in this document, please check the table below:
Magnetic Lock
Access Controller
DS-K4H250S
DS-K4H250D
DS-K4H450D
DS-K2601
DS-K2602
DS-K2604
DS-K4H258S
DS-K4H258D
Note
This document is simply used to guide users how to wire correctly and ensure access controllers can
control locks.
The access controller model in this document is DS-K2604.
Part 1 is mainly for magnetic lock wiring, and Part 2 and Part 3 are mainly for the situation that users
could get the door status on iVMS-4200 Client.
Notice
1.
Please cut off power supply before wiring;
2.
Please use a tool to screw magnetic lock screws in following picture, and remove the cover of
magnetic lock, find V+/V- and NO/NC & COM interfaces of magnetic lock in following picture;
