ELIMINATION OF PROBLEMS
If you have problems operating this device, check the following:
1. If the device is properly connected (power cord connection).
2. It is important that the device is properly earthed – this prevents electric shock.
3. If the protective fuse is properly installed, and undamaged; if necessary, replace the fuse
as follows.
FUSE REPLACEMENT PROCEDURE
1. Remove the fuse holder.
2. Remove the old fuse, and connect the new one.
3. The fuse must be 2A (0.79 inches).
WARNINGS AND SAFETY
1. Ensure that all the accessories are in the package the device came in, and that the
device is in order. Only use the device in a vertical position.
2. Do not store the device in a humid environment.
3. Never clean the device with a damp cloth while it is operating.
4. Only use the device in environments with a temperature of – 10 to 40 ˚C and humidity of
0 to 70%.
5. If you are using this device to purify air, people are not permitted to be present in the
place where the device is being used, due to ozone’s strong oxidizing abilities.
6. Before dismantling (opening) the device, disconnect the power cord.
7. It is not recommended to switch the device on and off frequently. In order to prevent
damage, switch the device back on no earlier than 2 minutes after you switched it off.
8. Do not cover the air inlet or ozone outlet at any time while the device is operating.
9. If an ozone leak occurs inside the device, immediately switch it off and disconnect the
power cord.
10. The device is not suitable for operation in explosive or flammable environments. If you
must do so, exercise extreme caution.
11. If you are not planning to use the device for a longer period, place it back inside the box.
12. Even a small amount of ozone can cause nausea; in such a case, we recommend
you move to a ventilated area; the feeling of nausea can be relieved by drinking water.
13. This device may only be maintained or repaired by a qualified person
