3
HSL Mini-Matrix Quick Setup Guide
InSTallaTIon
SECTIONS
Table of Contents
1
3
2
Installing the KVM
General
•
Verify that all peripherals and computers are turned off prior to
connecting them to the product.
•
The KVM’s back panel is divided into Console Ports and Computer
Ports sections.
–
Connect peripherals which are due to be shared by the KVM
to the Console ports.
–
Connect each computer that requires access to the shared
peripherals to a Computer port group.
–
Make sure that every computer is connected to a separate
Computer port group.
–
Computer port group numbers are represented by push
buttons on the product’s front panel.
–
Switch peripherals between computers by pressing the push
buttons on the product’s front panel.
Step 1 – Connect peripherals to the KVM Console ports:
•
Keyboard:
Connect either a USb or PS/2 keyboard to the
corresponding KVM console keyboard port.
•
Video:
Connect the monitor cable to the KVM console video port.
•
Mouse:
Connect either a USb or PS/2 mouse to the corresponding
KVM console mouse port.
•
Audio peripherals:
Connect headphones / speakers to the KVM
console audio-out port.
•
USB peripherals:
Connect USb peripherals to the KVM console
fUSb port.
Note:
authentication devices such as smartcard and biometric readers are
enabled by default, other devices must be explicitly whitelisted – for further
information please refer to the KVM administrator’s guide.
fUSB Cable
Audio Cable
Mouse Cable
Display Cable
Keyboard Cable
Smart-Card
Reader
Computers
CONSOLE PORTS
COMPUTER/SOURCE PORTS
Audio
Keyboard
Mouse
Display
