43
System Tab:
Enable auto rebuild (default: Enabled)
When a physical drive fails, the controller will take the drive offline. Once you re-
insert or replace the disk, the controller will not automatically rebuild the array
unless this option is enabled.
Enable continue rebuilding on error (default: Enabled)
When enabled, the rebuilding process will ignore bad disk sectors and continue
rebuilding until completion. When the rebuild is finished, the data may be accessible
but may also be inconsistent, due to any bad sectors that were ignored during the
procedure. If this option is enabled, HighPoint recommends checking the event log
periodically for bad sectors warnings.
Rebuild Priority (default: Medium)
You can specify the amount of system resources you want to dedicate to rebuilding
the array. There are 5 levels of priority [Lowest, Low, Medium, High, Highest].
