53
Disabled Status
A disabled status array means that your RAID level does not have enough disks to
function.
Your data will be inaccessible
Rebuilding will not trigger, since RAID does not have enough parity data to rebuild
upon
Your options in Maintenance are:
Delete
Unplug
Recover
Delete
– will delete the array
Unplug
– will take array offline, making it safe to remove
Recover
– will attempt to recover the array using the list from the recover tab
Expanding an Existing Array
Important:
It is recommended to
Verify
/
Rebuild
your array before
Expanding
or
Migrating
. Once you start an
OCE
/
ORLM
procedure, you
can
stop the process but it
must
be resumed until completion.
To add more capacity to your current configuration follows these steps:
1.
Log in WebGUI
2.
Select desired controller from drop down menu on top left
3.
Click
Logical
4.
Click
Maintenance
for the array you want to change
Select a
different
RAID level to
Migrate
