HighPoint Technologies Inc
.
15
d.
Unlock the failed drive’s disk module of the storage enclosure and remove the failed drive by gently
sliding the drive module out of the enclosure.
WARNING
: Make absolutely sure that you remove the failed drive indicated by the GUI. Reinstall the disk
module immediately if you remove the wrong disk module.
e.
Replace the failed drive with a new disk module and secure in place. Once the drive has spin up to speed,
the WebGUI will indicate that the array is rebuilding (The “Status” shows Rebuilding and the percentage
complete) as shown below. The rebuild time is approximately 2 hours per TB.
f.
Once the rebuild is complete, the RAID array will return to the Normal status. Your data is now secure.
10.
Expanding RAID Storage Capacity
The RocketStor 6328 Adapter supports
OCE/ORLM
(
O
nline
C
apacity
E
xpansion /
O
nline
R
AID
L
evel
M
igration).
OCE/ORLM can expand current RAID storage configurations when capacity is running short, or migrate a RAID
array to a different RAID level, without deleting existing data.
Warning
: The OCE/ORLM process is irreversible. Please make sure each disk is in good health before
proceeding.
To use OCE/ORLM:
Step 1: Install the new disks and/or storage enclosure and attach it to the RocketStor 6328 using the
appropriate eSATA or Mini-SAS cable (see page 6 for more information).
Step 2: Boot Windows and start the WebGUI.
Step 3: Under the
Logical
tab, click
Maintenance
to the right of the
Status
column of the target array to
initiate the OCE/ORLM procedure.
a.
From the drop down-menu, select the desired RAID level.
b.
Click the OCE/ORLM button to open the
Array Transform/transforming
window.