5
Enclosure Setup
1.
Place the RocketStor 6124V on a level surface and remove each
disk tray.
2.
Carefully insert the 3.5” or 2.5” disk into each disk tray and secure
them with the provided mounting screws.
3.
After installing the hard drives, connect the RocketStor 6124V to a
power source.
4.
With the power cord connected to the power source, turn on the
RocketStor 6124V using the power button on the rear panel (click
the button to power on the
RocketStor
6124V).
5.
Connected the RocketStor 6124V to the host system with the USB
Type-C to Type-C cable.
Setting up the RocketStor 6124V
1.
Install the RAID Management software.
1)
Download the RAID Management Software (WebGUI) from
HighPoint Website:
http://highpoint-tech.com/USA_new/series-rs6124v-download.htm
2)
Extract the package and double Click the Installation program
to start installing the WebGUI
3)
Follow the
on-screen instructions to complete the installation
procedure.
2.
Driver Installation for Windows
1)
Boot up the Windows operating system.
2)
Download the Windows driver package from the HighPoint
website:
http://highpoint-tech.com/USA_new/series-rs6124v-download.htm