6
SATA Drives Installation and Ejecting
The RocketStor 5422A supports 1 or 2 disk configurations of 2.5” and
3.5” SATA storage devices of any performance level and capacity.
Installing a Device
- Carefully align the SATA device’s gold fingers
with the bay’s SATA connector. Gently push the device straight down
until secure.
Ejecting a Device
- Hold the
base of the RocketStor device
and press the Eject Button.
Gently remove the drive by
pulling straight upwards.
Note: The surface temperature of some 3.5" hard disks may exceed 50
degrees C after extended use - approach with caution. Carefully
assess the surface temperature of any hard disk before removal. If you
suspect the temperature is too high, please power down the target
drive using the RocketStor 5422A’s power button. Allow the drive to
cool for several minutes before removal.
