RocketRAID Browser Based RAID Management utility
Configure RAID Mode with Management Utility
The Management Utility allows you to setup RAID arrays in data protection mode or
in performance tuning mode if you have multiple external hard drives (Oxford) or a
SI (PM) device.
RAID Basics Explained
RAID 0
(striped disks) provides improved performance over standard single drive
configurations. A second external hard drive allows for higher bandwidth and greater
throughput.
RAID 1
(often called “mirroring’) provides protection from disk errors and single
disk failures. All data is duplicated (mirrored) on both external hard drives. The hard
drive continues to operate so long as at least one drive is functioning.
RAID 5
(striped disks with parity) combines three or more disks in a way that
protects data against loss of any one disk; the storage capacity of the array is reduced
by one disk.
