Linux(Fedora,Red Hat,SuSE) Driver Support
Step 4 Install Red Hat Enterprise/CentOS Linux
Installation steps for other RedHat Enterprise/CentOS Linux
1. Start installing Red Hat Enterprise/CentOS Linux by booting from the installation
CD.
2. On “Welcome to Red Hat Enterprise/CentOS Linux” installation screen, a
prompted label “boot:” will appear at the bottom of the screen:
For RedHat Enterprise/CentOS Linux 3, type in “expert text” (without quotation mark);
For RedHat Enterprise/CentOS Linux 4.x, type in “linux dd” (without quotation mark),
then press Enter;
For RedHat Enterprise/CentOS Linux 5.x, type in “linux dd” (without quotation mark),
then press Enter;
3. When prompted “Do you have a driver disk?”. Select “Yes”. When prompted
“Insert your driver disk and press OK to continue”, insert the driver diskette in
the floppy drive and then select “OK”.
4. The system will load RR26xx driver automatically. Continue the installation as
normal.
5. When asked “where do you want to install the boot loader? ” in the “Boot Loader
Configuration” dialog, you must select “Master Boot Record (MBR)” to make
your
rawrite.exe.
It can be found on the Red Hat Enterprise/CentOS Linux CD (under /dosutils). Just
run it under a command window and follow its prompt.
On a Linux system, you can use the “dd” command to make the boot diskette. Insert a
floppy disk into the floppy drive and type the command (amd64 driver for example):
# dd if=rr26xx-rhel5u1.img of=/dev/fd0
6-11
