HighPoint CLI Reference
CLI Command Reference
This chapter discusses the various HighPoint CLI commands: Query, Create,
Delete, Rename, Rebuild, Device, Verify, Task, Rescan, Events, Reboot, User,
Mail, Help and Exit.
Warning:
Operations under the Create/Delete commands may destroy data stored in the
disks, and the lost data can never be recovered. So you should take special
care when executing these commands. The CLI utility will not prompt before
each operation is committed.
Query Commands
Syntax
query controllers
query devices
query devices {device_id}
query arrays
query arrays {array_id}
query controllers
This command reports controller information.
Example
HighPoint CLI> query controllers
Typical output:
ID Channels
Name
1 8 RocketRAID 3522 SATA Controller
Note:
This release of CLI can only manage one adapter at a time. So there will be only
one controller listed even if you have multiple adapters installed.
query devices
This command presents status of all the physical devices to the controllers. It
provides a list of device ID, capacity, model number, status and array
attributes. Each device’s status will be listed as one of the following:
- 5 -