RAFE SAFETY CHECK AND MAINTANANCE
RAFA
ROOF ACCESS FAST ANCHOR
The RAFA should be stored in a dry and cool place.
Always check the RAFA before and after usage.
The sliding beam, the legs joints and the lever should all
move freely.
If there is any severe damage to the metallic parts or any
signs of rust or corrosion, stop using the anchor immediately
and contact Highnovate Distributor for instructions.
Clean the RAFA from dirt, sand or mud with a wet cloth and
dry thoroughly before storage. If there is still dirt in the
moving parts use air pressure to remove it.
Do not disassemble the anchor without getting permission
and training from Highnovate.
If any signs of significant wear appear on the legs rubber
pads, replace it before using the anchor again. A
replacement kit is available from Highnovate.
.
Rappeling on the Anchor
Use the RAFA like any
other anchor, connect a
carbiner and belay or
rappel from the anchor
Place the anchor in line
with the direction of load
to be applied to it.
The anchor is designed for
one person and for a single
rope. If you need a second
rope use another anchor.
Specific training for the
RAFA is available, contact
Highnovate for details.
