HighLine BM1400 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 53

HighLine BM1400 Скачать руководство пользователя страница 12

Section 1 - Safety

Page 1-5

READ, UNDERSTAND, AND FOLLOW SAFETY INSTRUCTIONS

Read, understand and follow all instructions and safety messages
included in this manual and on decals attached to the machine.

Allow only responsible, properly instructed individuals to operate
and service the machine.

Failure to follow the instructions and safety messages in this
manual and on the decals attached to the machine could result in
serious injury or death.

Keep all safety and instruction decals in good condition. Replace
any missing or damaged decals.

STOP TRACTOR BEFORE GOING NEAR MACHINE

Always disengage power take off, shut off tractor, remove key, set
park brake and wait for all parts to stop turning before servicing.

DO NOT OPERATE WITH SHIELDS MISSING

Close and secure guards and shields before starting machine.

Keep hand, feet, hair and clothing away from moving parts.

Contact with moving chains or parts could cause serious injury or
death.

«
...
10
11
12
13
14
...
»

Содержание BM1400






















































Отзывы:

Нет отзывов