HIGHLEAD GC24818-1D, Инструкция по эксплуатации

Страница: 5 / 30

If the marks deviate larger than 3 mm, adjust as follows.
（
1
）
Disconnect the plug (12 pins) of cable from the
machine head.
（
2
）
Run the machine and stop at “UP” position.
（
3
）
While holding the pulley, insert the “adjusting
tool” in the hole “A”, then remove the tool.
2
）
Adjust of “Down” position: When the pedal is
“Neutral” the machine stops at “Down” position. If the marks
deviate large than 5 mm, adjust as follows.
（
1
）
Disconnect the plug (12 pins) of cable from the machine head.
（
2
）
Run the machine and stop at “Down” position.
（
3
）
While holding the pulley, insert the “adjusting tool” in the hole “B”, then remove the tool.
3
）
Confirm the stop operation, then set the plug (12 pings) coming from the machine head into the
receptacle.

CAUTIONS ON USE
：
1. Lubrication(1)(Fig.4)
Pour oil up to position “H” of the oil tank.
During operation, check the oil level periodically, and in
cases where the oil level is below position “L”, replenish the
oil supply up to position “H”.
Use white spindle oil.
2.Lubrication (2)(Fig.5)
When a new sewing machine is used for the first time, or
sewing machine left out of use for a long time is used again,
replenish a suitable amount of oil to the portions indicated by
arrow in the fig.
Note: Lubricate the Hook Base everyday.
○ 1-2 drops
● 3-4 drops
—
2
—