HIGHLEAD GC20688 Series, Инструкция и список запасных частей

Страница: 10 / 62

—
9
—
in until the tube movement just starts and then a 1/8 turn farther. The hook lubrication is preset. Attach
cover plate 2 again. Setting the hook lubrication with screw 3.
(3) Lubricating wicks and felt (see the picture of above)
a. The wick 1 leading from the oil sump to the
oscillating crank 4 must be fixed between the groove 2
in the arm and the spring 3 of the recirculation wick.
b. When the oil satchel is changed, the flock side should
be faced to connecting plate 10. The oil wick 7 and 8
should be set between the oil satchel 9 and plate 8.
(4) Checking the lubrication oil.
Turn on the power switch. Depress the treadle
gently and check that the oil level rises in the oil sight
glass.
14) Adjusting the trailing length after thread trimming
Adjust by turning the pre-tensioner 1. If the
tension of the pre-tension is increased, the
lengths of the threads trailing from the needle
tips will be reduced; if the tension is reduced, the
lengths will be increased.
15) Back tacking
When the reverse lever 1 or the quick
reverse switch is pressed during sewing, the
feed direction will be reversed. When it is
released, the feed direction will return to
normal.