HIGHLEAD GA2688-1, Инструкция по эксплуатации и перечень запасных частей

Страница: 3 / 35

—
1
—
1. PRECAUTIONS BEFORES STARING OPERATION
1) Safety precautions
：
(1) When turning the power on, keep your hands and fingers away from the area around/under the needle
and the area around the pulley.
(2) Power must be turned off when the machine is not in use, or when the operator leaves the seat.
(3) Power must be turned off when tilting the machine head, installing or removing the “V” belt, adjusting
the machine, or when replacing.
(4) Avoid placing fingers, hairs, bars etc., near the pulley, “V” belt, bobbin winder pulley, or motor when
the machine is in operation.
(5) Do not insert fingers into the thread take-up cover, under/around the needle, or pulley when the machine
is in operation.
(6) If a belt cover, finger guard, eye guard are installed, do not operate the machine without these safety
devices.
2) Precautions before starting operation
：
(1) If the machine’s oil pan has an oil sump, never operate the machine before filling it.
(2) If the machine is lubricated by a drop oiler, never operate the machine before lubricating.
(3) When a new sewing machine is first turned on, verify the rotational direction of the pulley with the
power on. (The pulley should rotate counterclockwise when viewed from the pulley)
(4) Verify the voltage and (single or three) phase with those given on the machine nameplate.
3) Precautions for operating conditions
：
1) Avoid using the machine at abnormally high temperatures
（
35
℃
or higher
）
or low temperatures
（
5
℃
or
lower
）
.
2) Avoid using the machine in dusty conditions.
2
、
SPECIFICATION
Max. sewing speed (r.p.m) 800 r.p.m
Needle No. DY
×
3 26#
Needle bar stroke (mm) 56
Thread take-up lever stroke (mm) 96
Stitch length (mm) 0-11
Presser-foot stroke
By hand (mm) 13
By knee (mm) 20
Shuttie hook KSP-204N
Lubrication Manual